Hello
I have vCenter 6.5 with six ESXI 6.5 Hosts
Two Hosts have 4 plus network adapters installed.
I run Windows 2012 R2 and Windows 2016 Cluster Servers using iSCSI from my NAS Device which has iSCSI support al working well
I am trying to set up MPIO on the Windows server I run SQL Cluster servers.
I installed the iSCSI Software Adapter on Both Host 1 and Host 3
On Host 1 and Host 3 I created two VMKernel's VMkernal-iSCSI-1 and VMKernal-iSCSI-2 they both have one network adapter assigned.
After creating the VMkernels I went to the storage adapters hit the green + sign and added the two VMKernels.
Selected the target tab and entered the ip address on my NAS device
On the iSCSI Software Adapter I saw 24 Targets 0 Devices and 0 Paths
on the Network Port Binding tab the Path Status in NOT USED all others look good.
I tried to do a Dynamic Discovery on the ip address 10.x.x.x:3260 I saw nothing when I do a Static Discovery I see all my targets.
This is the same on both Host 1 and Host 2
Any ideas what I might be missing here?
Thank you,
Tom
